AUTOMATIC BARBED WIRE MAKING MACHINE


Live Demonstration of Automatic Barbed Wire Nails Making Machine

The group of barbed wire with unidirectional twist require take up unit of rotary type and this is placed below the table of the barbing unit and mounted on the stands on which the Prem barbing unit stands. The necessary transmission of power off the barbing unit is also incorporated.

Take-up unit for the reverse twist Prem barbed wire as also Mono Barbed wire is same and can be supplied either twin take up or single take up unit. This take up unit is mounted on brackets on the stand at the front end of the Prem barbed wire unit, the end from which the finished barbed wire emerged. The necessary power transmission of the barbing unit is incorporated.

Group A Barbed wire with uni-directional twist
1. .......................Glidden 2 Point
2. .......................Glidden 4 Point
3. ........................IOWA 2 Point
4. ........................IOWA 4 Point
5. ........................Domingo 2 Point
6. .........................Domingo 4 Point
Group B Reverse twist Barbed Wire
7. .........................2 Point
8. .........................4 Point
Group C single strand Barbed wire
9. .........................Mono Barbed Wire
10. .......................Concertin a short barb
Barb Spacing 75 mm 100 mm
Group A 20 25
Reverse Twist 20 30
Horse Power Required 5 H.P. 5 H.P.
Output 120-240 Barbs/Min 120-240 Barbs/Min
Production Capacity 500 -600 Kg 550 -650 Kg

NOTE: Design & Specifications of Machines are Subject to Change without any prior notice.

Home  ::  About Us  ::  Machines  ::  Contact Information
Copyright © 2003-07 Prem Industrial Corporation. All Rights Reserved. Designed by: Insite Solutions